You are here:   HomeOur ServicesTechnical TrainingTWI-CSWIP & BGAS

Course Brochure CSWIP Certification Requirements:

Visual Welding Inspector (Level 1) 3.0

Although there is no specific experience requirement it is recommended that candidates possess a minimum of six months’ welding related engineering experience and two years industrial experience.

Welding Inspector (Level 2) 3.1

Welding Inspector for a minimum of 3 years with experience related to the duties and responsibilities listed

Read More

in Clause 1.2.2 under qualified supervision, independently verified.
or
Certified Visual Welding Inspector (Level 1) for a minimum of 2 years with job responsibilities in the areas listed in 1.2.1 and 1.2.2 above.
or
Welding Instructor or Welding Foreman/Supervisor for a minimum of 5 years.

Senior Welding Inspector (Level 3) 3.2

Certified Welding Inspector (Level 2) for a minimum of 2 years with job responsibilities in the areas listed in 1.2.1, 1.2.2 and 1.2.3 above.
or
5 years' authenticated experience related to the duties and responsibilities listed in Clause 1.2.3, independently verified.

1.2.1 Visual Welding Inspectors (Level 1) (under the supervision of a Welding Inspector or Senior Welding Inspector)

a) Codes and standards Application of the requirements of codes and standards.

Read More

b) Parent material identity Verification against documentation and markings of correctness of parent material.
c) Welding consumables identity Verification of correctness of welding consumables (electrodes, filler wires, consumable inserts, gases, fluxes etc).
d) Pre-weld inspection Verification that dimensions, fit up and weld preparations are in accordance with the engineering drawings
e) Preheating Verification that preheat (where required) is in accordance with specified procedures.
f) Post weld visual inspection Visual inspection and dimensional check of completed weldment against specification requirements and drawings.
g) In-process welding surveillance Surveillance during welding to verify compliance with specified procedure including any prehea inter pass temperature control and post heat requirements.

1.2.2 Welding Inspectors (Level 2)

Those given above plus:

Read More

h) Supervision of Visual Welding Inspectors in the conduct of activities (a) to (g) above.
i) Welding procedures Establishing that a procedure is available, has been approved as required by the appropriate authority and is being employed in production.
j) Witnessing of welder and procedure approval tests, witnessing the preparation of test pieces and destructive tests, and verifying compliance with appropriate standards and specifications.
k) Welder approvals Verification that adequate and valid welder approvals are available, and that only approved welders as required are used in production.
l) Post weld heat treatment Verification that post weld heat treatment has been conducted in accordance with specification requirements.
m) NDT reports Assessment of NDT reports on welding work for which the Welding Inspector is responsible.
n) Reports Preparation of inspection reports.

1.2.3 Senior Welding Inspectors (Level 3)

Those given above plus:

Read More

o) Supervision of Welding Inspectors and Visual Welding Inspectors in the conduct of activities (a) to (n) above as appropriate.
p) Certification of compliance Final acceptance and certification that the requirements of the specification have been met.
q) Weld drawings Interpretation of weld drawings and weld symbols.
r) Records Maintenance of comprehensive inspection records.
s) Weld defects Appreciation of the factors influencing the formation of weld defects and their acceptability in relation to the written specification.
t) NDT results Verification of NDT reports on welding work for which the Senior Welding Inspector is responsible. This may include radiographic interpretation.
u) Quality assurance Ensuring that quality assurance standards and procedures are maintained.

Represented in Kuwait by

TCB Cert.Worldwide LLC

419/421Al Anoud Complex, Makkah Street,
Fahaheel, Kuwait
T: +965 23911858/F: +965 23911898 
Email: This e-mail address is being protected from spambots. You need JavaScript enabled to view it , www.tcbcert.org 
P.O B 1294, Salmiya 22013
Kuwait

Events

NEBOSH IGC Tutor guided Self Learning Mode

NEBOSH IGC Training In Blended Mode (In Partnership with TWI ME)  http://ww

Sep07
QMS Auditor/ Lead Auditor Course

QMS Auditor Training with a difference to create value to organizations ! TCB Ce

Feb01

In focus

  Traffic Accidents cost thousands of life around the world today. Besides drivers f
Read more »
Managing Stress at Home and work is important.Stress reduces your ability to deliver and r
Read more »
QMS Auditor Training with a difference to create value to organizations ! TCB Cert organiz
Read more »
Does Training make your people more vulnerable to leave with the Certificates? Many Peo
Read more »
Accident just do not happen-they are results of systematic failure of measures - either th
Read more »